Pendulum room temperature measuring transducer (globe thermometer)
钟摆式室温测量换能器（球形温度计）
THERMASGARD® RPTM2
校准电阻温度计THERM ASGARD® RPTM 2，连续输出，RPTM 2不带/带可选显示屏（用于指示实际温度），接线盒外壳由抗冲击塑料制成，外壳盖带快速锁定螺丝。摆式室内传感器专门设计用于较大房间或大厅的温度检测，例如，作为暗辐射传感器。由于该摆式室温传感器采用的测量方法结合其在室内的定位，实现了代表房间的出色测量结果。RPTM 2（球形温度计）确定有效辐射的有效部分或测量位置的有效辐射热。确定球体温度以便考虑热辐射并估计热舒适度（手术室温度）。手术室温度描述了热辐射和热对流的共同作用（球体温度/空气温度的比率约为70％至30％）。传感器经过工厂校准。可以由用户进行调整/微调（范围和零点可调）。
传感器：Pt1000
型：遥控传感器
Calibratable resistance thermometer THERMASGARD® RPTM 2, with continuous output, RPTM 2 without ⁄ with optional display (for indicating the actual temperature), with terminal box enclosure made of impact-resistant plastic, and enclosure cover with quick-locking screws. The pendulum room sensor is specifically designed for temperature detection in larger rooms or halls, for example, as a dark radiation sensor. Due to the measuring method employed by this pendulum room temperature sensor in combination with its positioning in the room, an excellent measuring result that is representative of the room is achieved. The RPTM 2 (globe thermometer) determines the effective portion of active radiation or the effective radiant heat at the measured location. The globe temperature is determined in order to take heat radiation into consideration and to estimate the degree of thermal comfort (operative room temperature). The operative room temperature describes the co-action of heat radiation and heat convection (the ratio of globe temperature ⁄ air temperature is approx. 70 % to 30 %). The sensors are factory-calibrated. Adjustment ⁄ fine adjustment by the user is possible (range and zero points are adjustable).
sensor: Pt1000
type: Remote sensor
Output type
U currentI - current
| Type | | Output type |
| | |
|---|
| RPTM2-U |
| U current |
|
|
|
| RPTM2-U DISPLAY |
| U current |
|
|
|
| RPTM2-I |
| I - current |
|
|
|
| RPTM2-I DISPLAY |
| I - current |
|
