- 产品详情
- 产品参数
- 产品评论
S+S REGELTECHNIK室温，湿度和温度传感器
RPTM 2 房间测温传感器
THERMASGARD® RPTM 2 - Modbus
校准电阻温度计与地球THERM ASGARD® RPTM 2 -的Modbus带Modbus连接，接线盒外壳由耐冲击的塑料，具有快速锁紧螺钉外壳盖，有/无可选的显示指示的实际温度。
摆式室内传感器专门设计用于较大房间或大厅的温度检测，例如，作为暗辐射传感器。由于该摆式室温传感器采用的测量方法结合其在室内的定位，实现了代表房间的出色测量结果。球形温度计确定有效辐射的有效部分或测量位置的有效辐射热。确定球体温度以便考虑热辐射并估计热舒适度（手术室温度）。手术室温度描述了热辐射和热对流的共同作用（球体温度/空气温度的比率约为70％至30％）。传感器经过工厂校准。
传感器：Pt1000
输出：Modbus
类型：远程传感器
calibratable resistance thermometer with globe THERMASGARD® RPTM 2 - Modbus with Modbus connection, terminal box enclosure made of impact-resistant plastic, enclosure cover with quick-locking screws, with ⁄ without optional display indicating the actual temperature.
The pendulum room sensor is specifically designed for temperature detection in larger rooms or halls, for example, as a dark radiation sensor. Due to the measuring method employed by this pendulum room temperature sensor in combination with its positioning in the room, an excellent measuring result that is representative of the room is achieved. The globe thermometer determines the effective portion of active radiation or the effective radiant heat at the measured location. The globe temperature is determined in order to take heat radiation into consideration and to estimate the degree of thermal comfort (operative room temperature). The operative room temperature describes the co-action of heat radiation and heat convection (the ratio of globe temperature ⁄ air temperature is approx. 70 % to 30 %). The sensors are factory-calibrated. Adjustment ⁄ fine adjustment by the user is possible (zero point offset is adjustable).
sensor: Pt1000
Output: Modbus
type: Remote sensor
产品型号
RPTM2-MODBUS
RPTM2-MODBUS DISPLAY
