上海麒诺-工业自动化服务商

个人中心

搜索

上海麒诺-工业自动化服务商

PREMASREG® DS 1差压开关/差压控制器

***

产品详情

产品参数

产品评论

Differential pressure switch / differential pressure controller

差压开关/差压控制器

PREMASREG® DS 1

机械压差开关/差压监视器PREM ASREG® DS 1与金属角度，用于监视上述的大气，差动和低于大气压的清洁空气，在空气管道，进气口或排气气体，无侵蚀性介质的压力设备。作为流量监控器，差压调速器，用于电加热器的流量监控的压力控制器以及用于监控V型皮带和过滤器的压力控制器，作为用于监控呼吸机，阻尼器或作为极限值控制器的气压不足保护。使用内部精度刻度在内部完成开关点调整。

这些仪器经过工厂校准。提供DS 1差压传感器，包括ASD-06连接装置（2 m连接软管，两个压力接头，螺钉）。

压力： 20 ... 300Pa，5 0 ... 500Pa，100 ... 1000Pa，500 ... 2000Pa，1000 ... 5000Pa 输出：带转换触点

The mechanical differential pressure switch ⁄ differential pressure monitor PREMASREG® DS 1 with metal angle, is used for monitoring above-atmospheric, differential and below-atmospheric pressure of clean air, gaseous, non-aggressive media in air ducts, air intake or exhaust devices. As a flow monitor, differential pressure governor, pressure controller for flow monitoring at electric heating registers as well as for monitoring V-belts and filters, as air pressure deficiency protection for monitoring ventilators, dampers, or as a limit value controller. Switchpoint adjustment is done internally using the internal precision scale.

These instruments are factory-calibrated. The DS 1 differential pressure sensor is supplied including the ASD-06 connection set (2 m connection hose, two pressure connection nipples, screws).

Pressure: 20...300Pa, 50...500Pa, 100...1000Pa, 500...2000Pa, 1000...5000Pa
Output: with Changeover contact

Type	Measuring range pressure	Item No.
DS-106	20...300Pa	1302-4011-0000-000
DS-106 A	50...500Pa	1302-4012-0000-000
DS-106 B	100...1000Pa	1302-4013-0000-000
DS-106 C	500...2000Pa	1302-4014-0000-000
DS-106 D	1000...5000Pa	1302-4015-0000-000